Twin element hot water tank kit
- Top and bottom temperature sensors
- LV control Head
- Remote monitoring and control
- Autonomous control
- DUoS and TNUoS optimisation
- Leak detection sensor (optional)
- Measures RMS current
- 5-year warranty
- PRE2000CU3 Control head unit
- PRE2000PU3 Power unit
- PRE2000SR3 Slave relay
- PRE2000PIU Probe interface unit
- PRE2000TTS2-R Top temperature sensor
- PRE2000TTS2-B Bottom temperature sensor
- RJ45 Cables x3
- Thermal paste
The Prefect Irus PRE2000W2-4 is a complete kit of components for connecting a twin element hot water tank system to the Prefect Irus control system.
The PRE2000CU3 is the control head unit and the control element of the kit. The head unit collects and stores data from the sensors and controls the PRE2000PU3 and PRE2000SR3 switching power to the elements.
The PRE2000PU3 power unit is the power supply for the low voltage head unit and the PRE2000SR3. The power unit houses a 16A relay for switching the 1st element when commanded by the head unit. The power unit uses mains borne signalling to transmit and receive data and commands between the head unit and Prefect Irus central control. Using the RJ45 connection, the PU3 connects the slave relay to the control head unit affording the use of a second relay. The top and bottom temperature sensors are connected to the control unit via the probe interface unit (PIU). Four core cable is used to connect the PIU to the CU3.
The PRE2000SR3 slave relay is a secondary relay unit. The slave relay is connected by either a low voltage wiring connection or direct connection to the PU3 using the supplied 300mm RJ45 patch lead.
Once connected to the PU3 the slave relay can be directly controlled via the control head unit along side the PU3, the slave relay has a 16A relay output to control the second element.
The PRE2000TTS2-R & PRE2000TTS2-B are temperature sensors for hot water tanks with either a plastic or metal jacket. The R (red) is the top temperature sensor coloured red for easy and reliable identification.The B (black) is the bottom temperature sensor coloured black. The sensors incorporate a copper contact and isolated pressure spring to ensure good contact with the tanks outer skin.
1.25ml of thermal paste is applied to both copper contacts to thermally bond the sensors to the copper surface of the hot water tank providing an accurate and consistent temperature reading. The copper contact is forced onto the tank by a spring, the spring is thermally isolated and insulated so as not to corrupt temperature readings. A high tack adhesive 0.55mm polycarbonate overlay is then applied over the sensor opening, compressing the spring and forcing the contact onto the tank surface while resealing the insulating jacket.