Menu

PRE3205

Ceiling-mounted Infra-red settable photocell

Key features

  • Supply voltage - 220-240 Volts AC 50Hz
  • Load -10A resistive and incandescent, 6A fluorescent, 3A compact fluorescent, 3A low energy lighting, 3A low voltage lighting switching primary of the transformer, Maximum 6 fluorescent fittings, for fluorescent lighting total power factor correction capacitance must not exceed 40μF, Switch SON lighting with an appropriately rated contactor.
  • Light level adjustment 100 LUX t1000 LUX approx.
  • Terminal capacity - 2.5mm²
  • Material - Flame retardant ABS, fixing clip polypropylene
  • Type - Class 2
  • Temperature - -10°C to 35°C
  • Conformity - EMC-2004/108EC LVD-2006/95/EC
  • 5-year warranty

 

The PRE3205 photocell automatically adjusts the light output of luminaires depending on the amount of natural light available, to a maintained illuminance level.

The PRE3205 photocell will turn lighting on when the ambient light falls below a preset level. The lighting will then be turned off when the total light level rises above a separate preset level. The unit also has a switch input for manual override when required.

An integral, adjustable time delay prevents nuisance switching caused by, for example, dark clouds. The unit has a voltage free changeover output which can be used to switch, a BMS or lighting control system as well as switching a load directly.

This product has an integral sensitivity and time adjustment. All timings, light levels, and all other parameters are programmed via the PRE5901 or PRE5903 programming handsets. Once programmed the parameters are fully tamperproof. One handset will program all PRE3205 sensors and a selection of other Prefect products.

For DALI and DSI direct digital dimming see the PRE3205-DD.
For 1-10V analogue dimming see the PRE3205-AD

Downloads

Product Information

Instructions

Wiring Diagrams